Hand Rehabilitation Robot Glove Hemiplegia Rehabilitation Physiotherapy Glove Stroke Recovery Equipment Hand Therapy Equipment

Rehabilitation Glove + Mirror Glove + Machine

🖐️🖐️Multiple Modes Training- Auto training mode/mirror training mode/finger training mode, which can be switched freely during training.Generally, stroke hand therapy equipment 20 minutes of training time is a reasonable time, Mirror Image Training, By Driving The Flexion and Extension Of The Healthy Hand, The Gloves Imitate The Movement Of The Affected Hand, Allowing for Continuous Imitation and Re-Learning.

🖐️🖐️Easy To Use- Finger Rehabilitation robot gloves Feature An Lcd Touch Screen Design and Come with English Instructions, Making It Easy for stroke patients products To Efficiently Operate and Use Them. with Its Quick and Easy-To-Wear Design, Stroke Hemiplegia Recovery Patients Can Independently Complete Their Daily Rehabilitation Training Plan and Directional Training, Including Flexion, Extension, and Grasping.

🖐️🖐️Split Finger Training- This Rehabilitation robot gloves Allows You To Effectively Exercise Weak Or Spastic Fingers, As Well As Improve Finger Grasping Ability. with Its Innovative Rotary Switch, You Can Control The Flexion Movement Of Each Finger Individually for More Targeted and Effective Training. Don’T Let Finger Weakness Hold You Back, Use This rehabilitation equipment To Improve Your Hand Dexterity and Overall Rehabilitation Progress.

🖐️🖐️Hand Grip Training- This Stroke Recovery Equipment Intelligently Imitates Hand Movements and Structure, Allowing for Independent Movement and Grasping. Use its theraputty for hand therapy with Its Intelligent Hand-Grasping Simulation Technology, It Can Replicate Extension, Flexion, and Other Actions To Alleviate Hand Spasm, Stiffness, and Other Problems.

🖐️🖐️Portable Arthritis Gloves- It can be used by plugging in at home. You can use stroke recovery equipment train your hands anytime, anywhere, whether indoors or outdoors.The intensity can be adjusted according to your specific situation.

Set A

Features:

3-pump power
Simple operation
Pneumatic does not hurt the hand
Multiple modes available
Touch screen control
Autonomous training

Suitable for:

Post-operative rehabilitation
Slow reaction time
Hand injuries
Numbness

Function:

1.Bionic joint drive gloves
Can be automatically trained to mimic hand grasping and stretching movements and stimulate the brain to relieve hand stiffness.

2.Finger splitting training
You can choose the form of single-finger, double-finger, multi-finger, etc. You can choose to open or close the valve for practicing according to your needs.

3.Mirror Mode
Through the healthy hand to drive the affected hand, the healthy hand flexion and extension to drive the other side of the action, through continuous imitation as well as re-learning, in order to promote the training effect.

4. Stimulate finger grasping memory
Stimulate the connection between the brain and the hand to relieve the stiffness by making a fist and stretching.

Set B

Set C

Set D

Set E

Scan QR code–View instructions and videos for use.

1. Wear training gloves:
Try to extend your fingers to the bottom as much as possible, and the Velcro at your wrist should be as tight as possible to avoid loosening during training. Thick straps should be fixed at the tigers mouth, while thin straps are used to secure other fingers. if one finger sleeve is loose and easy to fail off, you can use thin straps to fix it.

2.Link to the host:
Rotate the glove connector and screw it into the socket on the left side of the host. Be careful to screw it in. As the host is driven by gas to move the glove, the socket will be relatively tight, and it cannot be inserted directly.

3. Wear mirror gloves:
Mirror gloves are worn by the healthy side of the hand.

Attention:

The exhaust and heat dissipation holes of the host are located below, so it is necessary to keep the machine clean and ventilated. lt cannot be placed on the bed or ground for use. Damage caused by improper use is not covered by the warranty. Please be aware.

Passive training

After turning on the computer, it defaults to passive training. At this time, the first icon on the left side of the host lights up, and the gloves continue to be passively extended and closed with manual operation.You can press the third button on the right side of the host to adjust the gear ‘position, with 1-9 gears. The larger the number, the stronger the force, and the longer the opening and closing time.

Mirror training

In the power-on state, press the first button on the right side of the host [mode switch button]. After pressing. the second icon on the left side of the host will light up, and the gloves will become continuously stretched.This proves that the mirror mode has been turned on. At this time, we press the button on the palm of the mirror gloves, press and hold it for a long time, and the training gloves will clench their fists. The hand wearing the mirror gloves will release the button, and the training gloves will extend. Repeat this action, it is the process of mirror training.

Confrontation training

In the power-on state, press the first button on the right side of the host [Mode switch button] twice to switch to adversarial mode. At this time, the third icon on the left side of the host lights up, indicating that it has entered adversarial mode.